Private & Reserved IP Address Ranges

Which ranges are private, loopback, link-local (DHCP failed) or documentation-only. Covers RFC 1918, CGNAT, multicast and TEST-NET.

RangeNamePurposePublicly routableGotcha
10.0.0.0/8RFC 1918 私有Large enterprise internal networkNo16.7M addresses — easy to over-allocate and never reclaim
172.16.0.0/12RFC 1918 私有Mid-size internal networkNoIt is 172.16–172.31, not 172.0–172.255
192.168.0.0/16RFC 1918 私有Home / small officeNoMany devices default to 192.168.1.0/24 and collide when merged
100.64.0.0/10CGNAT(RFC 6598)Carrier-grade NAT shared spaceNoDo not use internally; it conflicts with ISP-side addressing
127.0.0.0/8环回Points at the local host; 127.0.0.1 is the common oneNoThe whole /8 is loopback, not just 127.0.0.1
169.254.0.0/16链路本地(APIPA)Auto-configured when DHCP failsNoSeeing it means DHCP failed — check the link and DHCP server
0.0.0.0/8“本网络”Appears in default routes and listen addressesNoAs a destination it usually means “any/default”
224.0.0.0/4组播Video conferencing, IPTV, OSPF multicastPartly224.0.0.1/24 stays on the local link
239.0.0.0/8管理范围组播Common for enterprise multicastRoutable internallyRequires multicast routing (PIM)
240.0.0.0/4保留Experimental / future useNoCannot be assigned; devices will not communicate
255.255.255.255/32受限广播Broadcast on the local segment onlyNoNever forwarded across subnets
192.0.2.0/24TEST-NET-1Documentation examplesNoFor docs only — do not assign
198.51.100.0/24TEST-NET-2Documentation examplesNoSame as above
203.0.113.0/24TEST-NET-3Documentation examplesNoSame as above
198.18.0.0/15基准测试Benchmarking network equipmentNoLab use only
192.88.99.0/246to4 中继(已弃用)LegacyNoIf you see it, the config is very old
Source: RFC 1918, RFC 5735 / RFC 6890 (special-use address registry), RFC 6598 (CGNAT). Last updated: 2026-11-20