MTU & MSS Reference – PPPoE, VPN, Jumbo Frames

Typical MTU and MSS for Ethernet, PPPoE, GRE, IPsec, IPv6 and jumbo frames — useful when large packets fail.

Link typeMTUMSS (IPv4)Note
Standard Ethernet15001460The usual default
PPPoE broadband14921452Top cause of “web works, large packets fail”
GRE tunnel14761436Adds 24 bytes of overhead
IPsec (typical)1400 左右1360Varies by algorithms; test it
VXLAN1500 → 底层需 1550+—Adds 50 bytes; raise the physical MTU
IPv6 minimum12801220Links below 1280 cannot carry IPv6
Jumbo frames90008960Must match end to end, or it gets slower
PPPoE + IPv614921440(IPv6 头 40 字节)IPv6 headers are 20 bytes larger
Source: RFC 894 (Ethernet), RFC 2516 (PPPoE), RFC 8200 (IPv6). Tunnel values are common vendor defaults; check your device config. Last updated: 2026-11-20